Bay Technical Associates 350 Manual De Usuario
Using the Console Interface
893-00992-B
3-29
Port Configuration screen fields.
*. You cannot modify this field for the BayStack Model 350F switch 100BASE-FX fiber optic ports (ports 13 and 14).
†. The BayStack Model 350F switch 100BASE-FX fiber optic ports (ports 13 and 14) can be set to 100 Mbs/Half or
100 Mbs/Full.
Table 3-7.
Port Configuration screen fields
Field
Description
Port
Indicates the switch port numbers, from 1 to 16, that correspond to the field settings
in that row of the screen (for example, the field settings in row 2 apply to switch port
2). Note that settings in the All row (bottom row) apply to all 16 switch ports.
in that row of the screen (for example, the field settings in row 2 apply to switch port
2). Note that settings in the All row (bottom row) apply to all 16 switch ports.
Status
Allows you to disable any of the switch ports. You can use this feature to control
access to any switch port.
access to any switch port.
Default Value
Enabled
Range
Enabled, Disabled
Link
A read-only field that indicates the present link state of the corresponding port, as
follows:
•
follows:
•
Up: The port is connected and operational.
•
Down: The port is not connected or is not operational.
Auto Negotiation*
When enabled, sets the corresponding port speed to match the best service provided
by the connected station, up to 100 Mb/s in full-duplex mode.
by the connected station, up to 100 Mb/s in full-duplex mode.
Default Value
Enabled
Range
Enabled, Disabled
Speed/Duplex†
Allows you to manually configure any port to support an Ethernet speed of 10 or
100 Mb/s, in half- or full-duplex mode.
100 Mb/s, in half- or full-duplex mode.
Range
10 Mbs/Half, 10Mbs/Full, 100Mbs/Half, 100Mbs/Full
350fbk.book Page 29 Wednesday, July 9, 1997 4:51 PM