Bay Technical Associates 350 Manual De Usuario
Using the BayStack 350 10/100 Autosense Switch
2-14
893-00992-B
Connecting Power
The BayStack 350 switch does not have a power on/off switch. When you connect
the AC power cord to a suitable AC outlet, the switch powers up immediately.
the AC power cord to a suitable AC outlet, the switch powers up immediately.
To connect the AC power cord, follow these steps:
1.
Plug one end of the AC power cord into the AC power receptacle, located
on the BayStack 350 switch back panel.
on the BayStack 350 switch back panel.
2.
Plug the other end of the AC power cord into a grounded AC power
outlet.
outlet.
3.
Proceed to the next section, “Verifying the Installation,” to verify proper
operation.
operation.
Warning:
Removal of the power cord is the only way to turn off power to this
device. The power cord must always be connected in a location that can be
accessed quickly and safely in case of an emergency.
accessed quickly and safely in case of an emergency.
350fbk.book Page 14 Wednesday, July 9, 1997 4:51 PM