Barco E-2320 C (SE) Manual De Usuario

Display installation

43

The display has 2 different video inputs: Digital (DVI) and VGA 
(Sub-D 15).

You can connect one or more of these inputs. The best and 
easiest connection is DVI.

If several video inputs are connected (meaning the display is 
connected to different video controller boards) you can switch 
inputs by using the display’s on-screen display.

1. Connect one end of the DVI cable to the DVI input of the 

display.

2. Connect the other end of the DVI cable to the DVI 

connector of the display controller. If this board has 2 video 
heads (2 video outputs), connect to Vid 1 (Head A).

Figure 13

1. Connect the left display (when looking at the front side) to 

Vid 1 as described above.

2. Connect the second display to Vid 2 (Head B).