Barco Clinical review MDRC-2124 Manual De Usuario

Appendix

Troubleshooting

If you are experiencing trouble with the LCD display, refer to the
following troubleshooting. If the problem persists, please contact your
local dealer or our service center.

Problem: No image appears on screen.

• Check that all the I/O and power connectors are correctly and

well connected as described in the “Installation” section.

• Make sure the pins of the connectors are not crooked or

broken.

Problem: Partial image or incorrectly displayed image.

• Check to see if the resolution of your computer is higher than

that of the LCD Display.

• Reconfigure the resolution of your computer to make it less

than or equal to the native resolution (1920 x 1200).

Problem: Image has vertical flickering line bars.

• Use “Clock” to make an adjustment.

• Check and reconfigure the display mode of the vertical refresh

rate of your graphics card to make it compatible with the LCD
Display.

Problem: Image is unstable and flickering

• Use “Phase” to make an adjustment.