Bang & Olufsen 2-Jul Manual De Usuario

When you have finished setting 
up the loudspeaker as described 
on the following pages, connect 
the entire system to the mains. 

The loudspeaker is equipped with a 

thermal protection system which 

prevents damage from overheating. 
If an error occurs – or the speaker 
units become overheated – the 
system automatically switches the 
loudspeaker to standby. 

> Disconnect the loudspeaker from 

the mains. 

> Allow the system time to reset or 

cool down (approximately 3–5 
minutes). 

> Reconnect the loudspeaker to the 

mains. 

Cleaning the loudspeaker 
Clean dusty surfaces using a dry, 
soft cloth. If necessary, remove 
grease stains or persistent dirt with 
a lint-free, firmly wrung cloth, 
dipped in a solution of water 
containing only a few drops of 
mild detergent, such as washing-
up liquid. 

The loudspeaker front grill may be 

cleaned with a vacuum cleaner with 
a soft brush nozzle, and set to the 
lowest level. 

Switching on and off 
When you switch on your Bang & 
Olufsen system, the loudspeaker 
switches on simultaneously, and 
when you switch the system off 
again the loudspeaker also switches 
off. 

Caution: Handle the loudspeaker 
front grill with great care. Dents 

3