Burnham BH Manual De Usuario

1.   Check all electrical connections to assure they are 

secure.

2.   Check rigidity of unit mounting. Tighten all 

fasteners, if necessary.

3.   Inspect piping, strainers, traps, fi ttings, etc.

1.   Set thermostat to lowest position.

2.   Turn on power supply to unit. 

3.   Open return gate valve, and then open supply gate 

valve to unit.

4.   Raise thermostat setting to desired position.

5.   Adjust louvers (if provided) for desired heat 

distribution.

6.   To insure proper sequence of operation, cycle unit 

on and off a few times by raising and lowering 
thermostat setting.

7.   Check for proper rotation of fan. All fans must rotate 

in a counterclockwise direction when viewed from 
the back (BH) of the unit heater.