Bühler 595 Manual De Usuario
17
Removing the Loader from Your Tractor
(Continued)
4.
Roll back the bucket slightly and simultaneously extend or retract
the lift cylinders to free hooks from spools. Then slowly back
up the tractor.
the lift cylinders to free hooks from spools. Then slowly back
up the tractor.
5.
Once the subframe is clear of the boot and the hook is clear of the mounting boss, roll
back the bucket all the way. This raises the rear uprights of the loader.
back the bucket all the way. This raises the rear uprights of the loader.
NOTE: On some mountings, the lift cylinders
must be extended more while the tractor is
backing up, so that the subframes clear the
front axle.
must be extended more while the tractor is
backing up, so that the subframes clear the
front axle.
6.
Continue backing up until the loader is clear.
CAUTION! Be sure the hoses DO NOT get
pinched or catch on any frame members
while backing up.
pinched or catch on any frame members
while backing up.
7.
After the loader is clear, retract the lift cylinders to protect the shafts and disconnect the
hydraulic lines at quick couplers.
hydraulic lines at quick couplers.