Brother Server Version 0 ENG Manual De Usuario
20
Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))
3
Configuring your machine when the SSID is not broadcast
3
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1
TKIP is supported for WPA-PSK only.
For example:
3
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
supports the use of the first WEP key only.
b
Press a or b to choose Network.
Press OK.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
Press OK.
d
Press a or b to choose Setup Wizard.
Press OK.
Press OK.
e
When WLAN Enable? is displayed, press a to accept.
This will start the wireless setup wizard.
To cancel, press Cancel.
This will start the wireless setup wizard.
To cancel, press Cancel.
f
The machine will search for your network and display a list of available SSIDs.
Choose <New SSID> using a or b.
Press OK.
Choose <New SSID> using a or b.
Press OK.
Network name: (SSID)
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
Open system
NONE
—
WEP
Shared key
WEP
WPA/WPA2-PSK
AES
TKIP
Network name: (SSID)
HELLO
HELLO
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
WPA2-PSK
AES
12345678