Brocade Communications Systems Brocade ICX 6650 53-1002599-01 Manual De Usuario

Connecting network devices

3

Deleting an IP address

Enter a command similar to the following to delete an IP address.

Brocade(config-if-1/1/1)# no ip address 1.1.2.1

This command deletes IP address 1.1.2.1. You do not need to enter the subnet mask. 

To delete all IP addresses from an interface, enter the following command:

Brocade(config-if-1/1/1)# no ip address *

Syntax: no ip address ip-addr | *

Connecting network devices

Brocade devices support connections to other vendors’ routers, switches, and hubs, as well other 
Brocade devices.

Connectors

For port pinouts, refer to 

Connecting a network device to a fiber port

For direct attachment from the device to a Gbps NIC, switch, or router, using a fiber optic 
transceiver, you will need fiber cabling with an LC connector.

For information about transceivers supported on ICX 6650 devices, refer to the following Brocade 
website:

To connect the device to another network device using a fiber port, you must do the following tasks:

•

Install a fiber optic transceiver (SFP, or SFP+)

•

Cable the fiber optic transceiver

The following sections describe these tasks.