Braun 34443 Manual De Usuario

Page 44

Third row 60/40 split bench seats 
have been modified during conver-
sion procedures.  Seat backs can be 
folded down to the flat position and 
tipped forward to provide full access to 
rear floor storage compartments.  The 
Stow ’n Go (stow in floor) feature is 
not available.  

Seat removal is allowed for the driver 
side section of the seat (instructions 
on opposite page).  The electronic 
control module assembly is mounted 
under the passenger side section of 
the seat.  Removal of the passenger 
side section of the seat is prohibited*.  

* Should removal of the passenger 

side section of the third row seat 
be imperative, contact The Braun 
Corporation at 1-800-THE LIFT

®

.           

A Braun Product Support represen-
tative will direct you to an authorized 
service technician.    

Seat backs can be folded down to 
the flat position and tipped forward.  
Seats must be returned to the full 
stowed (locked) position before 
driving.

To Fold (tip forward) Third Row 
Seats 

1.  From the rear of the vehicle, fold 

down the back of the bench seat 
(pull release strap #1).

2.  Pull the release strap at the rear 

of the seat (between seat base 
and floor), and lift and fold (tip) 
the seat forward.

Carefully (slowly) rotate and lower 
seat rearward to stowed position.  
Ensure the rear spring-loaded at-

tachments engage floor strikers.  
Raise the seat back (pull release 
strap #1) and attempt to move 
seat back and forth.

Caution:  Use extra care when 
lowering passenger side section 
of seat.  Do not slam seat down 
or allow seat to drop (free-fall).  
Doing so may result in damage 
to the electronic control module 
assembly.