Böwe Bell+Howell S006830 Manual De Usuario

                                           

  21 of 142

• Power requirements: Power outlet with AC 100–120 V, 50/60 Hz or AC 220–240, V 50/60 Hz.
• Use a voltage level that does not vary more than ±10% from the voltage level marked on the 

scanner nameplate. The nameplate is located on the back side of the scanner.

• The scanner must be connected to a grounded outlet.
• The scanner should be used only with the power cord that is supplied with the scanner or with a 

power cord that has been approved by a certified electrical contractor.

• Do not use an extension cord.

To prevent accidental damage to CD-ROMs, handle them carefully as shown below:

• Do not touch or write on the surface of the disc.

• Do not leave the disc out of the protective case.

• Do not leave the disc in direct sunlight or near heat sources.