Bil-Jax Wheelchair XLB-4232 DC Manual De Usuario

Descargar
Página de 116
XLB-4232 DC 
 
3-4 
 
Upper Control Panel 
The upper control panel (Figure 3-3) is mounted in the work basket. The following 
controls and indicators are available on the upper control panel. 
BATTERY CHARGE
INDICATOR
 
Figure 3-3.   Upper Control Panel (DC Model) 
BUCKET TILT COMPENSATOR Switch (DC Model Only) 
A BUCKET TILT COMPENSATOR switch allows for slight adjustment to the level of 
the work basket. Adjustment is limited to 3 degrees in either direction. 
Battery Charge Indicator (DC model only) 
Indicator LEDs light up to indicate the level of charge remaining in the batteries. Lighted 
green LEDs indicate a good charge level. Lighted yellow LEDs indicate the need for 
charging soon. Lighted red LEDs warn that the battery charge level is low; boom 
operations should be halted until the batteries are recharged. 
BOOM  FAST/SLOW  Selector Switch 
The BOOM  FAST/SLOW selector switch controls the speed of the selected boom 
motion. Generally, the switch is set on FAST to position the boom in the general 
proximity of the work area. Then, the switch is set on SLOW to fine tune the position of 
the boom to get closer to the work area. 
EMERGENCY  STOP  Pushbutton 
When pressed, the EMERGENCY  STOP pushbutton disconnects electrical power to the 
upper and lower control panels. The EMERGENCY  STOP pushbutton should only be 
pressed to immediately stop all boom motion. To resume control, pull to disengage the 
emergency stop switch contacts.