Bil-Jax Wheelchair XLB-4232 DC Manual De Usuario

It is very important to apply and maintain the correct wheel nut torque on the boom lift 
trailer. The wheel nuts must be evenly tightened to the following specified torque 
increments whenever a trailer wheel is removed and installed. Use the following 
tightening procedure: 

1.  Evenly tighten the wheel lug nuts to 25 lb-ft (34 N

·

m) in the tightening sequence 

shown in Figure 4-1. 

 

2.  Evenly tighten the wheel lug nuts to 60 lb-ft (81.4 N

·

m) using the nut tightening 

sequence shown. 

3.  Evenly tighten the wheel lug nuts to 100 lb-ft (135.6 N

·

m) using the nut 

tightening sequence shown. 

Lubrication makes operation of the XLB-4232 DC Boom Lift more efficient and extends 
the equipment life. Use the following procedures to lubricate the boom lift components. 

1.  Lubricate trailer and outrigger jack posts and all grease fittings labeled  

LUBRICATE  WEEKLY  with NLGI Grade 2 multi-purpose grease.  

2.  Lubricate all  LUBRICATE  MONTHLY  grease fittings with NLGI Grade 2 

multi-purpose grease. Wipe off dirt and grease residue. Add approximately ½ 
ounce of fresh grease to each fitting. See Figure 4-2 for grease fitting locations.