Bil-Jax Building Set ll 204 82 Manual De Usuario

METAL CONDUCTS ELECTRICITY! DO NOT USE WHERE EQUIPMENT OR USER MAY

CONTACT POWER LINES OR OTHER LIVE ELECTRICAL CIRCUITS.
•  Inspect scaffold daily and before each use.

•  DO NOT alter or override safety devices under any circumstances.
•  DO NOT use wire, rope, or any other type of tie down device to modify the intended func-

tion of safety dog, pinning device, winch, crank, or any other Mason-Jax component. If all

components are not functioning properly, product malfunction such as free wheeling descent

could occur.

•  DO NOT use without guard rails or toeboards installed.
•  DO NOT sit or stand on guard rails.
•  DO NOT stand on or climb crossbraces.
•  DO NOT use crossbraces for a platform support.
•  DO NOT exert horizontal force on top of a free standing scaffold.
•  DO NOT use boxes, ladders, or any other means to increase the working height.
•  DO NOT overload - check with factory for safe working loads.
•  DO NOT place loads cantilevered beyond outermost edge of tender platform.
•  DO NOT apply shock load. When stocking materials, ease loads onto platform.
•  Carriages and towers move in opposite directions. Keep body parts, clothing, materials, etc.

clear of these parts.

•  Immediately replace a guard rail and toeboard after loading tender platform.
•  Access scaffold platform only by independent scaffold stair tower, through building wall

opening, or by extension ladder. DO NOT CLIMB TOWER SECTIONS OR CROSS BRAC-

ES TO ACCESS PLATFORM.

IN ADDITION TO THE ABOVE, FOLLOW ALL FEDERAL, OSHA, STATE AND LOCAL CODES

AND REGULATIONS FOR THE PROPER USE OF THIS EQUIPMENT.

1.  Slide the level board brackets onto the

tender and mason's brackets.

2.  Bolt through the level board adaptors with

the 1/2" x 6-3/4" long hex bolts and nuts as

shown below.

©Copyright Bil-Jax, Inc.

Aug, 1990, Print Date Apr, 2006

Printed in the U.S.A.