Best Manufacturers PRO 600E Manual De Usuario

Descargar
Página de 107
NovaJet PRO 600e User's Guide
4-6  Printer maintenance and storage
Periodic cleaning
To assure the best quality printing, you should clean the cartridges and service station daily for
heavy use and once a week for moderate use. In addition, you should wipe any areas of the
printer exposed to ink and the slide shaft using a lint-free cloth moistened with water.
Note:  Do not lubricate the print shaft! Keep it clean using a clean cloth and rubbing alcohol.
The table that follows identifies periodic cleaning which you can perform to keep your printer in
top operating condition.
Interval
Component
Cleaning Agent
Immediately
Any - clean up ink spills
Distilled water
Daily, as needed
Service station seals and wipers
Distilled water
Monthly
Slide shaft
Isopropyl alcohol
Encoder strip top and bottom
Distilled water
Cartridge jet area
Distilled water
Semiannually
External areas
Distilled water
Twice a month
Pinch rollers and lower drive
rollers
Isopropyl alcohol
Annually
Encoder sensor
Canned air or alcohol-
moistened cloth.
Inner platen
Distilled water
Carriage
Distilled water
As Required
Keypad
Industrial Film Cleaner
Other
When a cartridge is changed
or there is a problem with the
prime
Cartridge dimples/flex driver
cables
Isopropyl alcohol
Materials to use for cleaning
Isopropyl alcohol (industrial grade)
Lint-free soft cloth/paper wipe
Dry lint-free cloth
Cotton  swabs
Ultrasonic cleaner (if available)
Distilled/Reverse osmosis water (purified water)
Canned/compressed air.
Components to annually inspect
The following components should be cleaned and inspected for damage on an annual basis and
replaced if necessary.
Carriage belt
Service station seals and wipers
Trailing cable
Cutter