Balay 3TI60081A Instruccion De Instalación
23
Removing the transport
locks
locks
Unscrew all four screws
using the spanner
using the spanner
supplied.
Completely remove all transport locks and
take the mains cable out of the retainers.
take the mains cable out of the retainers.
Insert the protective
covers.
covers.
– Before using the appliance for the first
time, ensure that all transport locks have
been removed and kept safe for any
subsequent transport.
subsequent transport.
– For transporting at a later stage: You must
make sure that the transport locks are
refitted, which will prevent the washing
machine from being damaged.
refitted, which will prevent the washing
machine from being damaged.
Positioning and
levelling
levelling
– Appliance stability is essential to ensure that the washing machine
does not “creep” during spin cycles.
– The installation area must be firm, clean and level.
– Parquet floors and soft floor coverings, e.g. carpets or foam-backed
floor coverings, are unsuitable.
Levelling
Intense noise, vibrations and “wandering” may be the result of incorrect
levelling.
levelling.
– All four appliance feet must stand firmly on the ground.
– The washing machine must not rock.
– Check the alignment of the washing machine with a spirit level and
– The washing machine must not rock.
– Check the alignment of the washing machine with a spirit level and
adjust if necessary.
– The washing machine must not rest against the side panels of the
installation recess.
– The lock nuts on the front feet of the appliance must be screwed firmly
against the housing with the spanner.
.