Bakers Pride Ventless Hood System FH-28 Manual De Usuario

Descargar
Página de 24
Ventless Hood System 
 
Introduction 
 
 
Introduction 
Congratulations! You have chosen BKI’s Ventless Hood system, a state-of-the-art unit that filters grease 
laden air and returns it to the room. 
 
 
The BKI name and trademark on this unit assures you of the finest in design and engineering -- that it has 
been built with care and dedication -- using the best materials available. Attention to the operating 
instructions regarding proper operation, installation and maintenance will result in long lasting 
dependability to insure the highest profitable return on your investment. 
 
 
PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT. If you 
have any questions, please contact your BKI
 Distributor. If they do not answer 
your questions, contact the BKI
 Technical Service Department, toll free: 1-800-
927-6887. Outside the U.S., call 1-864-963-3471. 
Safety Precautions 
 
Always follow recommended safety precautions listed in this manual. Below is the safety alert symbol. 
When you see this symbol on your equipment, be alert to the potential for personal injury or property 
damage. 
 
 
Safety Signs and Messages  
The following Safety signs and messages are placed in this manual to provide instructions and identify 
specific areas where potential hazards exist and special precautions should be taken. Know and 
understand the meaning of these instructions, signs, and messages. Damage to the equipment, death or 
serious injury to you or other persons may result if these messages are not followed. 
 
 
This message indicates an imminently hazardous situation, which, if not avoided, 
will result in death or serious injury. 
 
This message indicates a potentially hazardous situation, which, if not avoided, 
could result in death or serious injury. 
 
This message indicates a potentially hazardous situation, which, if not avoided, 
may result in minor or moderate injury. It may also be used to alert against unsafe 
practices. 
 
This message is used when special information, instructions or identification are 
required relating to procedures, equipment, tools, capacities and other special 
data.