Waves Max Audio MX5000A Manual De Usuario

Preliminary 

 
Connect Inputs, Outputs, Power and Ground as described below.  Please see Figures 2 and 
3 for additional illustrations. 
 
 
Connect Inputs 

•  Three sets of stereo inputs are provided.  Located on the bottom edge of the PCB, 

these are labeled as LI1/RI1, LI2/RI2, and LI3/RI3.  Each stereo pair uses a common 
ground, labeled “G”, located between the left/right inputs. 

•  Connect stereo inputs and ground(s) as needed. 

•  All analog inputs support 4Vpp maximum input levels. 

 
 
Connect Outputs 

•  Connect stereo outputs, labeled LO and RO, on the left side of the PCB.  LO and RO 

use a common ground labeled GND between the LO and RO connection points. 

•  Connect subwoofer output (labeled SUB) and ground (labeled GND) if needed.   

•  All analog output support 4Vpp maximum input levels. 
 

 
Connect Power Supply and Ground 

•  Provide an external 5.0V DC and ground to the 5VIN and GND pins to the upper right 

corner of the PCB.  This needs to be a well regulated analog supply, since this voltage 
is connected directly to the analog_Vcc of the device without additional regulation. 

 
 

MX5000A Development System 

       

January 2007