West Elm Flat Stock Metal Double Sconce Instrucciones Para El Montaje
9. Pull canopy (I) up over the mounting plate (J), align the hole in the mounting plate with the hole in the canopy.
10. Insert the canopy screw (C) tighten with a screwdriver.
11. Unscrew socket ring (F )from the socket.
12. Place glass shade (H) on metal plate (K).
13. Place metal tube (G) onto the socket .
14. Screw on the socket rings (F) and tighten with wrench (E).
11. Unscrew socket ring (F )from the socket.
12. Place glass shade (H) on metal plate (K).
13. Place metal tube (G) onto the socket .
14. Screw on the socket rings (F) and tighten with wrench (E).
Completing the Assembly:
1. Insert (2) 60-watt Type B bulbs (not included) into the socket . DO NOT EXCEED SPECIFIED WATTAGE.
2. Restore power to junction box and test fixture.
2. Restore power to junction box and test fixture.
Care Instructions:
•
Wipe clean using a soft, dry cloth or static duster.
•
Always avoid the use of harsh chemicals and abrasives to clean fixture as they may damage the finish.
6. Connect the HOT FIXTURE WIRE to the HOT JUNCTION BOX WIRE (black). Fasten each together with a
plastic wire connector (A) and wrap the connection with electrical tape. Be sure no wire strands are exposed. DO
NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
7. Gently tuck the wire connections neatly into the ceiling junction box.
8. Attach the mounting plate (J) to the ceiling outlet box using the enclosed mounting screws (D). Tighten screws
8. Attach the mounting plate (J) to the ceiling outlet box using the enclosed mounting screws (D). Tighten screws
with a screwdriver.
page 2 of 2
9157959 - 01/07