Weber GENESIS 5000 Series Natural Gas Barbecue Manual De Propietario
27
Step 30
Install glass doors
You will need: one LH glass door assembly and two RH
glass door assemblies.
glass door assemblies.
Start with the LH door assembly. Insert the long hinge
pin at the top of the door into the plastic bushing in the
underside of the left frame. Insert the bottom (short)
hinge pin into the bushing in the frame connector.
Repeat the procedure with the RH door assemblies. The
glass doors latch on the frame connector. Figure 46.
pin at the top of the door into the plastic bushing in the
underside of the left frame. Insert the bottom (short)
hinge pin into the bushing in the frame connector.
Repeat the procedure with the RH door assemblies. The
glass doors latch on the frame connector. Figure 46.
View from side
View from top
Figure 45
Figure 46
Bushing in frame
connector and
short hinge pin
connector and
short hinge pin
Bushing in the
underside
underside
Bushing in underside
and long hinge pin
and long hinge pin
Step 29
Secure the side burner
Pull the right hand swing table up. Stand to the right side
of the barbecue. Slightly pull back both side burner
locks. Slide the side burner toward the control panel.
The locks will snap into the slots in the front and back of
the side burner. Figure 45.
of the barbecue. Slightly pull back both side burner
locks. Slide the side burner toward the control panel.
The locks will snap into the slots in the front and back of
the side burner. Figure 45.
CAUTION: Make sure both locks have snapped
into place.
into place.