Wasp Bar Code WPA1200 Manual De Usuario

 

38 

Flash memory is a rewritable location for programs and data files. The benefit of this feature is that files and 
programs saved in Flash Memory are unaffected by the WPA1200 power status. 

To access the Flash Memory files: 

1.  Connect the device to your computer.  

2.  In ActiveSync on your computer, click Explore. 

3. Double-click 

Storage Card folder. Click My Device, Double-click Flash Disk. 

To transfer files to Device’s Flash Memory: 

1.  Connect the device to your computer. 

2.  In ActiveSync on your computer, click Explore. 

a.  To copy the file to your device, right-click the file and click Copy. Place the cursor in the 

desired folder for the flash disk folder of your device, right-click, then click Paste. 

You may have to perform a reset if the device freezes (i.e., device no longer responds to the buttons or tapping 
on the screen). 

A soft reset, or Warm Boot, allows your device to get a fresh start, similar to rebooting a computer. This will restart 
your device and adjust memory allocation. All records and entries are retained after a soft reset. Unsaved data in 
open programs may in some cases be lost. 

Performing a Warm Boot 

1.  Remove the stylus from its holder. 

2.  Lightly press the tip of the stylus to the reset button located on the rear of the WPA1200. 

 
 
 
 
 
 
 
 
 
 
 

A cold boot cuts off power to your device, erasing all records and entries, deleting all programs you have added, 
and restoring the device to default factory settings. 

Never perform a cold boot unless a soft reset does not solve your problem. When you perform your next 
ActiveSync operation, you can restore any data that you previously synchronized to your computer or you can 
restore data that you backed up to a storage card.