Woodstock SHOP FOX W1686 Manual De Usuario
ASSEMBLY
-14-
Dust Port
Connect a dust collector to the 4" dust port on
the back of the sander as shown in Figure 5.
the back of the sander as shown in Figure 5.
If you do not have a dust collection system, you
can buy adapters to allow hook-up to a shop vac-
uum. Although not as adequate as a dust collec-
tor, a shop vacuum will help reduce the amount
of uncontained dust and debris.
can buy adapters to allow hook-up to a shop vac-
uum. Although not as adequate as a dust collec-
tor, a shop vacuum will help reduce the amount
of uncontained dust and debris.
Figure 5. Attach a dust collection system to
the 4" dust port to reduce the amount of
uncontained dust.
Failure to use a dust col-
lection system can result
in short and long-term res-
piratory illness. DO NOT
operate the Model W1686
without an adequate dust
collection system. This
machine creates substan-
tial amounts of wood dust
while in operation.
lection system can result
in short and long-term res-
piratory illness. DO NOT
operate the Model W1686
without an adequate dust
collection system. This
machine creates substan-
tial amounts of wood dust
while in operation.