White Rodgers 1F95-1291 Manual De Usuario

Descargar
Página de 16
Model
Programming Choices
1F95-1291
7 Day
5/1/1 Day
Non-Programmable
www.white-rodgers.com
Big Blue Humidity Universal Thermostat 
with Humidity/Dehumidity Control and 
Automatic Heat/Cool Changeover Option
PART NO. 37-6914D
Replaces 37-6914C
0905
Single Stage, Multi-Stage, Heat Pump
Installation and Operating Instructions
APPLICATIONS
1F95-1291 Humidity Control Touchscreen Thermostat
SPECIFICATIONS
Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS 
CAREFULLY BEFORE INSTALLING OR OPERATING THIS 
CONTROL COULD CAUSE PERSONAL INJURY AND/OR 
PROPERTY DAMAGE.
THERMOSTAT APPLICATION GUIDE
Thermostat 
Confi guration Options
Thermostat 
Applications
Maximum 
Stages
Heat/Cool
Single Stage 1
No Heat Pump (SS1)
Gas, Oil, Electric, Heat Only, 
Cool Only or Heat/Cool 
Systems, 2 or 3 wire Hydronic 
Zone (Hot Water or Steam) 
Systems, 24 Volt or Millivolt
1/1
Multi Stage 2
No Heat Pump (MS2)
2/2
Heat Pump 1
Single Stage Compressor 
Heat Pump (HP1)
Single Stage Compressor 
Heat Pump Systems - up to 2 
Stages Aux./Emergency Heat
3/1
Heat Pump 2
Two Stage or Two
Compressor Heat Pump 
(HP2)
Two Stage or Two Compressor 
Heat Pump systems - up to 2 
Stages Aux./Emergency Heat
4/2
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this prod-
uct may replace a product that contains mercury.
Mercury and products containing mercury must not be 
discarded in household trash. Do not touch any spilled 
mercury. Wearing non-absorbent gloves, clean up any 
spilled mercury and place in a sealed container. For proper 
disposal of a product containing mercury or a sealed 
container of spilled mercury, place it in a suitable shipping 
container. Refer to www.white-rodgers.com for location to 
send the product containing mercury.
Index
Page
Installation
2
Wiring Diagrams
3
Thermostat Quick Reference
5
Installer Confi guration Menu
6
Operating Your Thermostat
10
Programming
12
Troubleshooting
16
Electrical Rating:
 
Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . .    mV to 30 VAC, NEC Class II, 50/60 Hz or DC
 
Input-Hardwire  . . . . . . . . . . . . . . . . . . . . . . . . .    20 to 30 VAC
Terminal Load  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    1.5A per terminal, 2.5A maximum all terminals combined
Setpoint Range  . . . . . . . . . . . . . . . . . . . . . . . . . . . .    45 to 99°F (7 to 32°C)
Differential (Single Stage)  . . . . . . . . . . . . . . . . . . . .    Heat 0.6°F; Cool 1.2°F
Differential (Multi-Stage)  . . . . . . . . . . . . . . . . . . . . .    Heat 0.6°F; Cool 1.2°F
Differential (Heat Pump)  . . . . . . . . . . . . . . . . . . . . .    Heat 1.2°F; Cool 1.5°F
Operating Ambient. . . . . . . . . . . . . . . . . . . . . . . . . .    32°F to +105°F (0 to +41°C)
Operating Humidity  . . . . . . . . . . . . . . . . . . . . . . . . .    90% non-condensing max.
Shipping Temperature Range  . . . . . . . . . . . . . . . . .    -40 to +150°F (-40 to +65°C)
Dimensions Thermostat. . . . . . . . . . . . . . . . . . . . . .    4.6"H x 5.9"W x 1.2"D
To prevent electrical shock and/or equipment damage, 
disconnect electric power to system at main fuse or 
circuit breaker box until installation is complete.
CAUTION
!