HP ProLiant DL160 G6 E5504 2.0GHz Quad Core Non Hot Plug SATA Rack Server 490427-421 Manual De Usuario
Los códigos de productos
490427-421
HP ProLiant DL160 G6 (all models)
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
4GB (2x2GB) or 6GB (3 x 2GB) depending on model, PC3-10600E Unbuffered UDIMM memory, with ECC.
4GB (2x2GB) or 6GB (3 x 2GB) depending on model, PC3-10600E Unbuffered UDIMM memory, with ECC.
Maximum Memory
Up to 192GB memory is available with the optional installation of quad-rank PC3-8500R-7 16GB Registered RDIMM memory kits.
Up to 192GB memory is available with the optional installation of quad-rank PC3-8500R-7 16GB Registered RDIMM memory kits.
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
Some DIMM installation guidelines are summarized below:
For servers with eighteen (18) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
No mixing DIMM voltage; all DIMMs must be the same voltage
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
No mixing DIMM voltage; all DIMMs must be the same voltage
DIMM Type ->
Registered DIMMs (RDIMMs)
Unbuffered with ECC
DIMMs (UDIMMs)
DIMM Rank ->
Dual Rank (2R)
Quad Rank (4R)
Single
Rank (1R)
Dual Rank
(2R)
DIMM Capacity ->
2GB
4GB
8GB
8GB
4GB
16 GB
1GB
2GB
DIMM Native Speed (MHz) ->
1333
1333
1066
1333
1066
1066
1333
1333
SLOTS THAT CAN BE POPULATED
18 slot servers
18
18
18
18
12
12
12
12
MAXIMUM CAPACITY (GB)
18 slot servers
36
72
144
144
48
192
12
24
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333
1333
1066
1333
1066
1066
1333
1333
2 DIMM Per Channel
1333
1333
1066
1333
*
800
800
1066
1066
QuickSpecs
HP ProLiant DL160 Generation 6
Memory
DA - 13247 Worldwide QuickSpecs — Version 11 — 11.16.2009
Page 33