Whirlpool W10254494A - SP Manual De Usuario

Descargar
Página de 48
13
WASHER MAINTENANCE
CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes.  
To keep washer interior odor-free, follow this recommended 
cleaning procedure at least once a month:
1.  Make sure laundry drum is empty.
2.  Using recommended AFFRESH
®
 washer cleaner, add 
one tablet to washer basket
  OR
  If using liquid chlorine bleach, add 1 cup (250 mL) to 
liquid chlorine bleach dispenser.
IMPORTANT: Do not add detergent to CLEAN WASHER 
cycle. Do not use more than recommended amount of 
bleach to avoid damaging product over time.
3.  Close washer door.
4.  Press POWER.
5.  Select CLEAN WASHER with Affresh
 cycle.
6.  Press and hold START/PAUSE. 
NOTE: The basket will rotate, then the door will unlock, 
lock again, and then the cycle will continue. The washer 
will add some water, and the basket will rotate while 
the washer runs a short sensing cycle. This will take 
approximately 3 minutes. 
7.  The cycle will determine whether clothing or other items 
are in the washer. If no items are detected in the washer, 
it will proceed to Step 8. 
  If any items are detected in the washer, “rL” will be 
displayed, and the WASH and CONTROL LOCK lights 
will light. The door will unlock. Open and remove any 
garments in the wash drum. Press POWER to cancel the 
error message. Then repeat steps 3–6 to start the cycle 
again. 
8.  Once the cycle has started, allow it to finish. If you must 
cancel the cycle before it has finished, press POWER. 
“Int” (Interrupted) will appear in the display. It may take 
up to 10 minutes for the door to unlock.
9.  After the cycle has ended, leave the door open slightly, 
to allow for better ventilation and drying of washer 
interior. 
To clean exterior:
1.
  Use a soft, damp cloth or sponge to wipe up any spills.
2.  Use mild soap and water if needed. 
IMPORTANT: To avoid damaging washer finish, do not use 
abrasive products.
13.
  
Remove garments promptly  
after cycle is finished
Promptly remove garments after cycle has 
completed to avoid odor and rusting of  
metal objects on garments. When unloading 
garments, pull back the door seal and check  
for small items between the tub and the basket.
If you will be unable to remove the load 
promptly, use the FanFresh
 option. If the 
FanFresh
 option is selected, the washer will 
automatically activate the fan and tumble  
the load periodically for up to 16 hours. 
NOTE:
n
  
After any wash cycle is completed,  
the door must be opened and then  
closed before a new cycle can begin.
n
  
A small amount of water may remain in the dispensers after 
the wash cycle is complete. This is normal.
n
This washer has a tight seal to avoid water leaks. To avoid 
odors, leave the door open to allow the washer to dry 
between uses.