Westinghouse EPA (49 state) 10KPRO FULLY FEATURED Manual De Propietario
16
ASSEMBLY
6.
Install the lifting bracket using the hex bolts,
spacers and locknuts
spacers and locknuts
(see Figure 8).
1
2
3
4
Figure 8 – Installing Lifting Bracket
1 - Lifting Bracket
2 - Hex Bolt
3 - Spacer Sleeve
4 - Locknut
INSTALLING THE BATTERY
!
WARNING
To avoid electric shock:
•
ALWAYS connect the positive (+)
battery cable (red boot) first when
connecting battery cables.
battery cable (red boot) first when
connecting battery cables.
•
ALWAYS disconnect the negative (-)
battery cable (black boot) first when
disconnecting battery cables.
battery cable (black boot) first when
disconnecting battery cables.
•
NEVER connect the negative (-)
battery cable (black boot) to the
positive (+) post on the battery.
battery cable (black boot) to the
positive (+) post on the battery.
•
NEVER connect the positive (+)
battery cable (red boot) to the
negative (-) post on the battery.
battery cable (red boot) to the
negative (-) post on the battery.
•
NEVER touch both battery posts
simultaneously.
simultaneously.
•
NEVER place a metal tool across
both battery posts.
both battery posts.
•
ALWAYS use insulated or non-
conducting tools when installing the
battery.
conducting tools when installing the
battery.
OTE:
N
The generator comes equipped with the
positive battery cable (red boot) already
attached.
positive battery cable (red boot) already
attached.
1. Verify the positive (+) battery cable (red boot) is
securely tightened to the positive (+) battery post.
Make sure boot is over battery post.
Make sure boot is over battery post.
2. Carefully remove the protective wrapping around
the lug of the negative (-) battery cable (black boot).
3. Locate negative (-) cable attached to alternator
cable, remove tie and route to the negative (-)
battery post.
battery post.