Mazda CX-9 Guía De Instalación Rápida

3

4

    

 Park the vehicle.

    

  Adjust the seat to the desired position using the slide/tilt and

recline switches.

    

  Push the memory seat SET button followed by one of the programming

buttons (1-3) until a beep is heard. Programming is now complete.
Program the remaining two buttons as desired.

 

 

You can also program a seat position for each advanced key/retractable type

key used with the vehicle. See Owner’s Manual for programming instructions.

    

 Shift the selector lever to the P position.

    

  Push the programming button (1-3) that you selected when

programming your seat position.

Seats

Seat can be moved back
and forth, raised, lowered,  
or tilted with this control.

Push forward or backward to increase or
decrease lumbar support.

Push forward or backward
to adjust seatback angle.

    

 Open liftgate.

    

  Lower head restraints.

      

Pull each strap on the rear of

the seat while pushing the left  

and right seat forward to lay flat.

Pull the strap to return the seatback to the original position.

 •   Pull the third-row seat access lever on the  

side of the second-row seatback to fold  

and slide the seat forward to access  

third-row seating.

 •   Return the second-row seatback to the

normal upright position by pulling up on  

the seatback until it locks into place.

 •   Slide the second-row seat forward or back  

for proper legroom using the lever under  

the front of the seat.

To recline the seatback, lean forward slightly while folding lever. Then lean

back to the desired position and release the lever.

    

 Unfasten the lap portion of the center-rear seat belt.

    

 Slide seat all the way back toward rear of vehicle.

    

 Lower head restraints.

    

 Pull the seatback folding lever and fold the seatback forward.

To create a flat luggage compartment  

space, fold the seatbacks forward.

280345_11a_Mazda_CX-9_SSG_081010.indd   4-5

8/10/10   2:05 PM