Mazda CX-9 Guía De Instalación Rápida

15

16

nOTE: 

If the rear AUTO button is pushed while the front A/C button is off, the rear

air conditioning operates only to circulate air. Setting the temperature to the maximum

high or low will not provide the desired temperature at a faster rate.

Automatic Climate Control

The driver and front passenger
seats can be warmed by pushing
the applicable seat warmer button
while the ignition is ON.
•   Seat temperature increases as

the number of indicator lights
increases. Two lights equal
high, one light equals low.

•   When the seat warmers are

not needed, push button until
indicator lights are off.

Push to manually turn  

air conditioning ON or OFF.
Push to select the desired

airflow mode.
Push to display outside

temperature. Push and hold  

for three seconds or longer  

to switch from Fahrenheit  

and Celsius or vice versa.
Push to turn climate  

control system off.
Push to defrost the windshield.

Push to defrost the  

rear window.
Push to allow control from the

rear controls (indicator on).
Rotate dial to turn the  

system ON and to select  

the desired fan speed.
Push to recirculate cabin air

to reduce outside odors and

improve cooling (indicator  

on) or receive fresh air

(indicator off).

 AUTO On: Push dial to turn Automatic Air Conditioning system on. Rotate
dial to select your desired set temperature (shown in information Display
above). The airflow and amount of airflow will be automatically controlled  
in accordance with the set temperature.

Push to turn DUAL mode ON/OFF.
   •   With DUAL mode ON (indicator on), rotate the dial to set passenger

side (shown in the Information Display above).

   •   With DUAL mode OFF (indicator off), driver controls the temperature

setting on both sides.

Automatic climate control will allow you to maintain individual preset cabin
temperatures for the driver and passenger when DUAL mode is selected.

    

 Turn the front air conditioning on.

    

 Push the REAR control button on the front

 

control panel (indicator on).

    

  Selection of the airflow mode, airflow amount

and temperature will be automatically controlled

to the same setting as the front air conditioner.

Automatic Temperature control always works even if Auto indicator comes

off by rotating fan speed or changing vent mode.

280345_11a_Mazda_CX-9_SSG_081010.indd   16-17

8/10/10   2:07 PM