Mazda CX-9 Guía De Instalación Rápida

15

16

nOte: 

If the rear AUTO button is pushed while the front A/C button is off, the

rear air conditioning operates only to circulate air. Setting the temperature to the 

maximum high or low will not provide the desired temperature at a faster rate.

Automatic Climate Control

The driver and front passenger seats can be warmed by pushing the
applicable seat warmer button while the ignition is ON.
•   Seat temperature increases as the number of indicator lights 

increases. Two lights equal high, one light equals low.

•   When the seat warmers are not needed, push button until indicator 

lights are off.

nOte: 

The automatic temperature control always works, even if the AUTO ON

indicator light comes off after rotating the Fan Control Dial or changing vent mode.

nOte: 

Automatic climate control will allow you to maintain individual preset cabin 

temperatures for the driver and passenger when DUAL mode is selected.

•   Push to turn DUAL

mode on or off.

•  

With DUAL mode 
On (indicator on), 
rotate the dial to 
set passenger 
side temperature 
separate from the 
driver’s side (shown 
in the Information 
Display above).

•  

With DUAL mode 
OFF (indicator off), 
driver controls the 
temperature setting 
on both sides.

Push to allow
control from the 
rear controls 
(indicator on).

Push to
display outside 
temperature.

• Push OFF to turn climate

control system off.

• Rotate the dial to select

the desired fan speed.

Push to defrost
windshield.

Push to defrost
rear window.

Push to recirculate
cabin air to reduce 
outside odors and 
improve cooling 
(indicator on) or 
receive fresh air 
(indicator off).

Push to  
manually turn  
air conditioning 
ON or OFF.

AUtO On: Push dial
to turn Automatic 
Air Conditioning 
system on. Rotate
dial to select 
your desired set 
temperature (shown 
in information 
Display above). The
airflow mode and 
amount of airflow 
will be automatically 
controlled in 
accordance with  
the set temperature.

Push to select  
airflow mode.

    

 Turn the front air conditioning on.

    

  Push the REAR control button  

on the front control panel  
(indicator on).

    

   Selection of the airflow mode, 

airflow amount and temperature 
will be automatically controlled  
to the same setting as the front  
air conditioner.

    

1  Turn the front air conditioning on.

    

2   Push AUTO ON button on the rear control panel to turn Rear

Automatic Air Conditioning system on. Push Temperature setting
button on the rear control panel to select your desired set 
temperature. The air flow mode and amount of air flow will be
automatically controlled in accordance with the set temperature.

1284179_13a_Mazda_CX-9_SSG_101512.indd   16-17

10/15/12   3:04 PM