Harbor Freight Tools 95065 Manual De Usuario
SKU 95065
For technical questions, please call 1-800-444-3353
Page 2
SpECIFICATIOnS
Batteries
4.8 V NiCd Battery Pack
Charging Time
No more than 10 hours
Charger Adapter
Input: 120 VAC, 60 Hz
Output: 6 VDC, 300 mA
Output: 6 VDC, 300 mA
Speed
200 RPM
Chuck
Hex drive
Features
6 – Driver bits included
Save This Manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no number).
Keep this manual and the receipt in a safe
and dry place for future reference.
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no number).
Keep this manual and the receipt in a safe
and dry place for future reference.
GEnERAL SAFETy RuLES
WARnInG! Read all instructions
Failure to follow all instructions
listed below may result in electric
listed below may result in electric
shock, fire, and/or serious injury.
The term “power tool” in all of the
warnings listed below refers to your
line-operated (corded) power tool or
battery-operated (cordless) power
tool.
The term “power tool” in all of the
warnings listed below refers to your
line-operated (corded) power tool or
battery-operated (cordless) power
tool.
Work Area
Keep your work area clean and well
1.
lit. Cluttered benches and dark areas
invite accidents.
invite accidents.
Do not operate power tools in
2.
explosive atmospheres, such as in
the presence of flammable liquids,
gases, or dust. Power tools create
sparks which may ignite the dust or
fumes.
gases, or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep bystanders, children, and
3.
visitors away while operating a
power tool. Distractions can cause
you to lose control. Protect others in
the work area from debris such as chips
power tool. Distractions can cause
you to lose control. Protect others in
the work area from debris such as chips
and sparks. Provide barriers or shields
as needed.
as needed.
Electrical Safety
Avoid body contact with grounded
1.
surfaces such as pipes, radiators,
ranges, and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
ranges, and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
Do not expose power tools to rain
2.
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
a power tool will increase the risk of
electric shock.
Grounded tools must be plugged
3.
into an outlet properly installed and
grounded in accordance with all
codes and ordinances. Never remove
the grounding prong or modify the plug
in any way. Do not use any adapter
grounded in accordance with all
codes and ordinances. Never remove
the grounding prong or modify the plug
in any way. Do not use any adapter
plugs. Check with a qualified electrician
if you are in doubt as to whether the
outlet is properly grounded. If the
tools should electrically malfunction or
break down, grounding provides a low
resistance path to carry electricity away
from the user.
if you are in doubt as to whether the
outlet is properly grounded. If the
tools should electrically malfunction or
break down, grounding provides a low
resistance path to carry electricity away
from the user.
The Charger Adapter is equipped
4.
with a polarized plug (one blade is
wider than the other). This plug will
wider than the other). This plug will
fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
a polarized outlet. Do not change the
plug in any way. Double insulation
eliminates the need for the three wire
grounded power cord and grounded
power supply system.
a polarized outlet. Do not change the
plug in any way. Double insulation
eliminates the need for the three wire
grounded power cord and grounded
power supply system.
Do not abuse the Charger Adapter
5.
charging cable. Never use it to carry
the tool or pull the Adapter from an
outlet. Keep the charging cable away
from heat, oil, sharp edges, or moving
parts. Replace Charger Adapter when
charging cable is damaged.
the tool or pull the Adapter from an
outlet. Keep the charging cable away
from heat, oil, sharp edges, or moving
parts. Replace Charger Adapter when
charging cable is damaged.
REV 07l