Caterpillar TAURUS 70 Manual De Usuario
Turbomachinery Package Specification
Taurus
70 Compressor Set and Mechanical Drive
12 Enclosure
12.1 General
Description
The enclosure housing (Figure 20) is a completely self-contained, weatherproof,
insulated, and sound-attenuated system. The enclosure is mounted on the package skid
and supported by a heavy-duty frame. The enclosure sides include removable panels
and/or doors to allow access to major components for inspection and maintenance and to
permit removal of components by forklift or overhead crane. The engine area is furnished
with full height doors to facilitate engine removal from either side of the package. All
enclosure doors include a three-point heavy-duty door locking mechanism, handles,
hinges, latching mechanism, internal lock override release, restraining device, and
attaching hardware.
The enclosure panels are treated with fiberglass material for sound attenuation and
thermal insulation. Weather stripping is installed between all panels for sealing and sound
attenuation. The enclosure is normally factory assembled on the package skid prior to
shipment, but can be shipped as a kit for site assembly and installation. The following
standard features are included with the basic enclosure:
insulated, and sound-attenuated system. The enclosure is mounted on the package skid
and supported by a heavy-duty frame. The enclosure sides include removable panels
and/or doors to allow access to major components for inspection and maintenance and to
permit removal of components by forklift or overhead crane. The engine area is furnished
with full height doors to facilitate engine removal from either side of the package. All
enclosure doors include a three-point heavy-duty door locking mechanism, handles,
hinges, latching mechanism, internal lock override release, restraining device, and
attaching hardware.
The enclosure panels are treated with fiberglass material for sound attenuation and
thermal insulation. Weather stripping is installed between all panels for sealing and sound
attenuation. The enclosure is normally factory assembled on the package skid prior to
shipment, but can be shipped as a kit for site assembly and installation. The following
standard features are included with the basic enclosure:
• Inlet and exhaust ventilation silencers
• Single fan ventilation system
• Pressurization system
• AC lighting
• Equipment handling system
• Stainless steel door hardware
• IP 34 ingress protection rating
• Single fan ventilation system
• Pressurization system
• AC lighting
• Equipment handling system
• Stainless steel door hardware
• IP 34 ingress protection rating
Figure 20. Typical Taurus 70 Enclosure
© 2009 Solar Turbines Incorporated. All rights reserved.
TPS70CSMD/309
47