Caterpillar TAURUS 70 Manual De Usuario
Turbomachinery Package Specification
Taurus
70 Compressor Set and Mechanical Drive
15.2.4 Package Lifting Kit (Optional)
A package lifting kit can be shipped separately that contains slings, spreader bars, and
assorted hardware to facilitate separate lifting of the driver and driven equipment
modules with or without an export crate.
assorted hardware to facilitate separate lifting of the driver and driven equipment
modules with or without an export crate.
Table 14. Accessory Equipment Specifications
Battery Charger System
Charger Type
Wall Mounted, Bottom Entry, IP30
Supply Voltage
240, 380, and 480 VAC, 50 or 60 Hz.
Output
Single Phase, 120 VDC, 20 amps
Operating Temperature
-10
o
to 50
°C (14
o
to 122
°F)
Approximate Measurements
Height
90.2 cm (35.5 in.)
Width
40.4 cm (15.9 in.)
Depth
39.7 cm (15.63 in.)
Weight
56.7 kg (125 lb)
Ampere Hours
Valve Regulated, Sealed Gas-Recombination
Lead Acid
Lead Acid
100 Hours
Nickel Cadmium
131 Hours
Turbine Cleaning System
Water/Solvent Supply Pressure
85 to 100 psig (586 to 689 kPag)
Water/Solvent Supply Min. Temperature
Ambient (Except In Extreme Cold)
On-Line Water/Solvent Flow Rate
2.3 – 4.5 L/min (0.6 – 1.2 gpm)
On-Line Propulsion Air Flow Rate
0.026 nm
3
/min (0.98 SCFM)
Package On-Line Triple Stage Strainer
300/200/100 Micron
On-Crank Water/Solvent Flow Rate
9.1 – 12.9 L/min (2.4 – 3.4 gpm)
On-Crank Propulsion Air Flow Rate
0.080 nm
3
/min (3.0 SCFM)
Package On-Crank Triple Stage Strainer
300/200/100 Micron
External Air Supply
Clean Filtered Air
Air Supply Pressure
586 to 690 kPag (85 to 100 psig)
Turbine Cleaning Cart
Capacity
98 L (26 gal)
Tank Discharge Strainer
100 Micron
External Air Supply
Clean Filtered Air
Air Supply Pressure
586 to 690 kPag (85 to 100 psig)
Approximate Measurements
Height
102 cm (40.2 in.)
Width
55 cm (21.7 in.)
Length
121.6 cm (47.87 in.)
Approximate Weight
86 kg (190 lb)
Tank Material
316L Stainless Steel
Certification
American Society of Mechanical Engineers
(ASME) or Pressure Equipment Directive (PED)
(ASME) or Pressure Equipment Directive (PED)
Electrical Certifications
CSA LR
77954
Solar’s Applicable Engineering Specifications
ES 9-62
Ingestive Cleaning Solar Gas Turbine Engines
ES 9-98
Fuel, Air, and Water (or Steam) for Solar Gas Turbine Engines
ES 2416
DC Supply Systems
© 2009 Solar Turbines Incorporated. All rights reserved.
TPS70CSMD/309
64