SMC Networks EZ CONNECT SMC2755W Manual De Usuario

24

If Shared Key is enabled, the WEP should be enabled and at least 
one shared key should be defined. But you can enable WEP, and 
set the authentication type as open system.

Standard WEP Setup (WEP Default: Disable)

Default Shared Key – Choose the Shared Key that has the 
encryption string you prefer (Key 1~4).

64-Bit Manual Entry
Key 1~4 - Each Key ID contains 10 HEX digits. All wireless 
devices must have the same Key ID values to communicate.
128-Bit Manual Entry
Key ID contains 26 HEX digits. All wireless devices must have 
the same Key ID values to communicate.
152-Bit Manual Entry
Key ID contains 32 HEX digits. All wireless devices must have 
the same Key ID values to communicate.

How to setup the Unique Key WEP: 

1. Select a unique key (5 ~ 64)

2. Enter the encryption key and select the proper key size.

3. Click “Write” and “Apply” to save the encryption key.

4. If you want to read an encryption key, select the unique key 

you want to read, click “read” and “Apply” to read the 
encryption key.

5. If you want to delete an encryption key, select the unique key 

you want to delete, click “Delete” and “Apply” to delete the 
encryption key.