Sierra Wireless RAVEN 1X 20070914 Manual De Usuario
Universal Serial Bus (USB)
Rev 3.0B Feb.08
42
Installing the USB driver
1. Set the Port Type
Virtual Ethernet port is the default setting for the USB port. If
you want to install the virtual serial port, change the USB port
configuration using the directions above.
you want to install the virtual serial port, change the USB port
configuration using the directions above.
2. Connect the PinPoint X to your
computer’s USB port
computer’s USB port
When you connect the PinPoint X for the first time to a USB
port on your computer, Windows should detect a new device
and prompt you to install the driver.
port on your computer, Windows should detect a new device
and prompt you to install the driver.
Note: Windows will see each port type as a different USB device and
will see every port on your computer separately. If you change the port
type on the PinPoint X or connect to a different USB port on your
computer or hub, Windows will see it as a new device.
will see every port on your computer separately. If you change the port
type on the PinPoint X or connect to a different USB port on your
computer or hub, Windows will see it as a new device.
Figure 6-2: Found New Hardware Wizard
a.
To start the install of the USB virtual Ethernet driver,
select No, not this time and click Next.
select No, not this time and click Next.
b.
Select Install from a list of specific location and click
Next.
Next.