Schwinn 460 Manual De Usuario

Monitoring your Heart Rate is one of the best ways to control the intensity of your 
exercise. This feature is built into the Schwinn

®

 460 fitness machine. 

The Schwinn

®

 460 uses a Heart Rate Chest Strap Transmitter to send your Heart Rate 

signals to the console. The console displays your Heart Rate in “beats per minute” in the 
lower-middle window of the display. 

The Heart Rate Chest Strap Transmitter is included. 

Using the Schwin

n

®

 460 heart rate transmitter chest strap, you can monitor your heart 

rate at any time during your workout:

5.    The transmitter will send your heart rate to the Schwinn

® 

460 fitness machine’s receiver and your Beats Per Minute 

(BPM) will be displayed in the HEART RATE display within a matter of several seconds.

6.   Always remove the transmitter before cleaning the chest strap. Clean the chest strap regularly with mild soap 

and water and thoroughly dry it. Residual sweat and moisture keep the transmitter active and drain the battery 
in the transmitter.

Note:  Do not use abrasives or chemicals such as steel wool or alcohol for cleaning, as they can damage the 

electrodes permanently.

Replacement chest straps are available by calling your Nautilus

 

Representative.

If the Heart Rate Transmitter is not sending a signal to your console, the PULSE display will show 3 dashes. Check to 

make certain that the textured contact areas on the chest strap are contacting with your skin. You may need to lightly 

wet the contact areas. If no signal appears or you need further information, please call a Nautilus

 

Representative

.

1.   The heart rate 

transmitter is attached 

to a chest strap to 

keep your hands free 

during your workout. 

 

Attach the transmitter to 

the elastic chest strap. 

2.   Adjust the strap length 

to fit snugly and 

comfortably against 

your skin. Secure the 

strap around your 

chest, just below 

the chest muscles, 

and buckle it.

3.   Lift the transmitter 

off your chest and 

moisten the two 

grooved electrode 

areas on the back.

4.   Check that the  

wet electrode areas  

are firmly against  

your skin.

Owner’s Manual