Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

You can view the contents of a table as follows: 

show <table name> 

Example:  This command displays all parameter values of the SNMP IP access table 
(snmpipaccesstbl). 

You can create a table row as follows: 

set <table name> 0 <parameter 1 name> <value 1> … <parameter n name> <value n> 

When you create a table row, you must use 0 as row index. Only the mandatory parameters are 
required. Optional parameters automatically receive the default value unless a value is given. 

set snmpipaccesstbl 0 ipaddr 10.0.0.10 submask 255.255.0.0 

This command adds a row to the SNMP IP access table (snmpipaccesstbl) with the IP address 
(ipaddr) and subnet mask (submask) parameters, which are respectively assigned 10.0.0.10 and 
255.255.0.0. 

If you want to change a table entry, you must indicate the index of the table row and the parameter that 
must be modified. 

set snmpipaccesstbl 1 ipaddr 10.0.0.11 

This command changes the IP address (ipaddr) at row index 1 of the SNMP IP access table 
(snmpipaccesstbl) into 10.0.0.11. 

You can also modify several table entries at once by indicating the index of the table row and the 
parameters that must be modified. With the search command, you can see which parameters are in 
the table. 

set snmpipaccesstbl 1 ipaddr 10.0.0.12 submask 255.255.255.248 cmt “First Row”