Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

Transmit Power is a manual configuration selection to reduce the output power in the radio.  The output 
power level for the operating frequency can be found in the Event Log of the MP.11a embedded 
software. 

For more information about Transmit Power Control, see “Interface Configuration: Wireless Slot” on 
page 34.   

The Command Line Interface (CLI) is a text-based interface with which you can configure and manage 
the MP.11/a by entering commands.  This section describes only how to access the CLI; the interface 
itself is described in “Chapter 6.  Command Line Interface” 

The CLI can be used as an alternative to the Web Interface.  You can, for example, quickly change the 
settings of the MP.11/a by running commands in a batch. 

The CLI is accessible through the: 

▪ 

Ethernet port connected through the network or with a cross-over Ethernet cable between the 
computer and the MP.11/a 

▪ 

Serial port of the MP.11/a 

To use the CLI through the Ethernet port, you must have a telnet program and the IP address of the 
MP.11/a.  On most computers, the telnet program is called telnet.  See “MP.11/a IP Address” 

19

 for details. 

To access the MP.11/a through Ethernet: 

1.  From the Windows Start menu, select Run; enter 

 and click OK. 

2. Enter 

telnet followed by the IP address, as shown in the following sample DOS command 

window. 

 

3.  You are prompted for your password: 

Please enter password: 

4.  Enter the password (the default password is public). 

You can now use the CLI.