Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

Descargar
Página de 121
Tsunami MP.11and MP.11a Installation and Management 
Chapter 4.  Basic Management 
This chapter describes the initial setup of the MP.11/a, which lets you set up and monitor the basic 
features of the MP.11/a.  In most cases, setting up these basic features is sufficient.  
A full overview of the Web Interface is provided in “Chapter 5. Web Interface” 
For CLI commands you can use for basic management, see “Command Line Interface“ on page 79. 
The following topics are discussed in this chapter: 
▪ 
▪ 
General Settings 
▪ 
Monitoring Settings 
▪ 
Security Settings 
▪ 
To use the Web Interface for configuration and management, you must access the MP.11/a.  With 
ScanTool you can determine the unit’s current IP address.   Then enter http://<ip address> in your Web 
browser.  See “Chapter 3.  Management Overview” 
The Web Interface consists of Web page buttons and tabs.  A tab can also contain sub-tabs.  The 
following figure shows the convention used to guide you to the correct tab or sub-tab.  
 
The Web Interface also provides online help, which is stored on your computer (see “Installing 
Documentation and Software” 
in the Web Interface. 
Chapter 4.  Basic Management 
 
27 
CPN 65755 
 
Issue Date:  August 2003