Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

The System Configuration page lets you change the MP.11/a’s system name, location name, and so on 
(see the following System Configuration window).  These details help you to distinguish this MP.11/a 
from other routers, and lets you know whom to contact in case of problems.   

To go to this page, click the Configure button and the System tab. 

These settings do not influence the operation of the MP.11/a, with the exception of Mode of Operation, 
which sets the MPl.11/a as Bridge (layer 2) or Router (layer 3). 

You can enter the following details: 

This is the system name for easy identification of the MP.11/a.  Use the system name of this Base 
Station to configure the Base Station System Name parameter on a satellite if you want the 
satellite to register only with this Base Station.   If the Base Station System Name is left blank on 
the satellite, it can register with any Base Station that has a matching Network Name and Network 
Secret. 

Country (Tsunami MP.11a units only) 

This field is available on Tsunami MP.11a units only; when you choose a country with a regulatory 
domain that requires Dynamic Frequency Selection (DFS) or Transmit Power Control (TPC), they 
are enabled automatically.  The Country selection pre-selects and displays only the allowed 
frequencies for that country.  Click the Configure button, the Interfaces tab, and the Wireless sub-
tab to see the channel/frequency list.