Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

Descargar
Página de 121
Tsunami MP.11and MP.11a Installation and Management 
IP CONFIGURATION 
The IP Configuration window lets you change the MP.11/a IP parameters.  These settings differ when 
the MP.11/a is in Router mode.  
To go to this page, click the Configure button, the Network tab, then the IP Configuration sub-tab. 
 
If the device is configured in Bridge mode, you can set the following parameter: 
IP Address Assignment Type 
Select Static if you want to assign a static IP address to the MP.11/a; select Dynamic to have the 
device run in DHCP client mode, which gets an IP address automatically from a DHCP server over 
the network.  If you do not have a DHCP server or if you want to manually configure the IP settings, 
set this parameter to Static
You can set the following remaining parameters only when the IP Address Assignment Type is set to 
Static
IP Address 
The static IP address of the MP.11/a (default IP address is 10.0.0.1). 
Subnet Mask 
The mask of the subnet to which the MP.11/a is connected (default subnet mask is 255.0.0.0). 
Default Router IP Address 
The IP address of the default gateway. 
Default TTL 
The default time-to-live value. 
Chapter 4.  Basic Management 
 
33 
CPN 65755 
 
Issue Date:  August 2003