Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario

Selections for Data Rate are as shown in the following table. 

6 Mbps 
9 Mbps 

12 Mbps 
18 Mbps 
24 Mbps 
36 Mbps 
48 Mbps 
54 Mbps 

12 Mbps 
18 Mbps 
24 Mbps 
36 Mbps 
48 Mbps 
72 Mbps 
96 Mbps 

108 Mbps 

The Satellite Density setting is a valuable feature for achieving maximum bandwidth in a wireless 
network. It influences the receive sensitivity of the radio interface.  Selections are Large, Medium, 
Small, Mini, and Micro.  See “Satellite Density” on page 68 for more information. 

This is the registration process time-out of a satellite on a base. Default is 5 seconds. 

A network secret is a secret password given to all nodes of a network. A satellite can only register to 
a base if it has the same Network Secret. The Network Secret is sent encrypted and can be used as 
a security option. Also see “Network Name.”  

These parameters limit the data traffic received on the wireless interface and transmitted to the 
wireless interface, respectively.  Selections are in steps of 64 Kbps from 64 to 108,032 kbps.   

You can set the desired speed and transmission mode from this tab.  The recommended setting is 
auto-speed-auto-duplex. 

To set the Ethernet speed, duplex mode, and input and output bandwidth limits, click the Configure 
button, the Interfaces tab, and the Ethernet sub-tab. 

Note:  Current software always does auto-speed auto-duplex regardless of user selection.