Proxim Tsunami MP.11 and MP.11a CPN 65755B Manual De Usuario
Tsunami MP.11and MP.11a Installation and Management
The following table describes the properties and features of each version of RIP supported in the
Tsunami MP.11/a.
Tsunami MP.11/a.
Table 1 Properties and Features of Supported RIP Versions
RIPv1 RIPv2
RIPv1
Compatible
Broadcast Multicast Broadcast
No Authentication
Authentication Authentication
Classful routing
Classless routing (VLSM)
Classless routing (VLSM)
Distance-vector protocol
Distance-vector protocol
Distance-vector protocol
Metric-Hops Metric-Hops Metric-Hops
Maximum Distance 15
Maximum Distance 15
Maximum Distance 15
IGP IGP IGP
RIP Example
In the following example, assume that both the BSU and the SUs all are configured in Router mode with
RIP enabled to send and receive on both the Ethernet and Wireless interfaces. The network converges
through updates until each unit has the following routing table:
RIP enabled to send and receive on both the Ethernet and Wireless interfaces. The network converges
through updates until each unit has the following routing table:
BSU
0.0.0.0 172.16.0.1
metric
1
172.16.0.0 172.16.0.20
metric
1
10.0.0.0 10.0.0.1 metric
1
100.0.0.0 10.0.0.2 metric
2
200.0.0.0 10.0.0.3 metric
2
SU1
0.0.0.0 10.0.0.1
metric
1
10.0.0.0 10.0.0.2 metric
1
100.0.0.0 100.0.0.1 metric
1
172.16.0.0 10.0.0.1
metric
2
200.0.0.0 10.0.0.2 metric
2
SU2
0.0.0.0 10.0.0.1
metric
1
10.0.0.0 10.0.0.3 metric
1
200.0.0.0 200.0.0.1 metric
1
172.16.0.0 10.0.0.1
metric
2
100.0.0.0 10.0.0.2 metric
2
Chapter 5. Web Interface
56
CPN 65755
Issue Date: August 2003