Polaroid PV 360 Manual De Usuario

14

• The Power indicator will blink orange, then the lamp will turn off. Approximately 1 sec. after that, the

indicator will light orange.

• After the power is turned off, the lamp will be cooled for approximately 1 min. and the power cannot

be turned off even by pressing the STANDBY/ON button.

• The standby status will not be entered if the time which the STANDBY/ON button is pressed is too

short.

The fan will continue running for approximately 1 min. after the STANDBY/ON button is pressed.
Do not turn off the main power switch while the lamp is on because this will shorten the service life of
the lamp.

• Use the RGB cable included with this projector when using plug & play. With other cables,

pins (12) - (15) are sometimes not connected (effective only for RGB1).

• This device is recognized as a plug-and-play monitor. Use the standard Windows95/98 display

drivers.

• This function may not operate, depending on the personal computer used.
• When the DDC function does not operate on a personal computer running Wi n d o w s 9 5 / 9 8 ,

select the display type from Screen Priority. It is recommended that Super VGA 1024 x 768
(60-75Hz)  be selected as the display type.

The DDC function will not operate when connected to a Macintosh.

This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is
VESA DDC (Display Data Channel) compatible.
(Plug & play is a system configured with peripheral equipment including a computer and display, and an
operating system.