Patton electronic 000CU2 Manual De Usuario
Our miniature rack cards have a unique design: front func-
tion cards and rear interface cards that connect together on
a midplane power bus. This configuration allows interface
cables to remain connected while function cards are hot-
swapped (and vice versa). Each mini-rack and ClusterBox
has a power supply that services all cards in the chassis.
You can configure the mini-rack and ClusterBoxes with a
tion cards and rear interface cards that connect together on
a midplane power bus. This configuration allows interface
cables to remain connected while function cards are hot-
swapped (and vice versa). Each mini-rack and ClusterBox
has a power supply that services all cards in the chassis.
You can configure the mini-rack and ClusterBoxes with a
variety of function
cards (short-range
modems or
cards (short-range
modems or
SRMs,
fiber modems, convert-
ers, etc.) and you can mix-and-match function cards with
different interface cards.
ers, etc.) and you can mix-and-match function cards with
different interface cards.
16 ports fit a wide variety of Patton products—from
CSU/DSUs to short-range modems to converters.
CSU/DSUs to short-range modems to converters.
Multiple datacom devices fit side-by-side in our mini-rack and ultra-compact ClusterBoxes!
F E A T U R E S & B E N E F I T S
Multi-function—Supports interface converters, CSUs,
fiber modems and virtually all Patton mini-modems.
fiber modems and virtually all Patton mini-modems.
Hot-swappable—Replace function cards
without turning
off the power.
Reliable—Our distributed power system gives each rack
card its own power supply circuit
card its own power supply circuit
Flexible—Convenient rack mount and ClusterBox ver-
sions are available to meet your needs
sions are available to meet your needs
Choose from a variety of rear interfaces: DB-25, RJ-11,
RJ-45, UD-26, etc.
RJ-45, UD-26, etc.
Plug-in
Short-Range
Modems
(SRM)
Rack Card (RC) Description
(Configuration)
Page
Standalone
Model
Compatible
Rack Card
Rack Card (RC) Description
(Configuration)
Page
Standalone
Model
Compatible
Rack Card
Converters
& Modem
Eliminators
Fiber
Modems
Powered
Short-Range
Modems
(SRM)
Device
type
Device
type
S P E C I F I C AT I O N S
Environmental
Op. Temp.: 32–122°F (0–50°C)
Humidity: 5–90%, non-condensing
Op. Temp.: 32–122°F (0–50°C)
Humidity: 5–90%, non-condensing
24 VDC Power
Input Voltage: 18–36 VDC
Input Current: 2A Max at 18 VDC
Surge Protection: Triggered at
39 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicators: Power, DC Input
Input Voltage: 18–36 VDC
Input Current: 2A Max at 18 VDC
Surge Protection: Triggered at
39 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicators: Power, DC Input
48 VDC Power
Input Voltage: 40–60 VDC
Input Current: 1A Max at 40 VDC
Surge Protection: Triggered at
75 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
Input Voltage: 40–60 VDC
Input Current: 1A Max at 40 VDC
Surge Protection: Triggered at
75 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicators: Power, DC Input
120 VAC Power
Input Voltage: 100–230 VAC
Input Current: 400 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power
Input Voltage: 100–230 VAC
Input Current: 400 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power
220 VAC Power
Input Voltage: 200–240 VAC
Input Current: 200 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power
Input Voltage: 200–240 VAC
Input Current: 200 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power
CATALOG
Network Access & Connectivity
CONNECTIVITY—
MINI-RACK PRODUCTS
MINI-RACK & CLUSTER-BOXES
226