Parrot MKi9200 Manual De Usuario
Parrot MKi9200 – User guide
12
Getting
started
WARNING
: If the remote control doesn’t seem to be associated to the electronic box while using the Parrot
MKi for the first time, refer to the
Associating the remote control to the electronic box
section.
Navigating through the menus
Associating the remote control to the electronic box
If the remote control doesn’t seem to be associated to the electronic box while using the Parrot MKi9100:
After verifying the CR2032 battery is properly inserted in
the remote unit, press and hold the
and buttons
then press the button several times. This has to be
done when you see the "Parrot MKi9100" Logo on the
display screen.
done when you see the "Parrot MKi9100" Logo on the
display screen.
Within 1 to 2 seconds, you should then see a “Pairing
Remote Control” message displayed on the screen. At
that time, you can release the buttons and the remote
should then be paired with the kit and the message will go
away. You can verify remote operation by navigating
through the menus.
Remote Control” message displayed on the screen. At
that time, you can release the buttons and the remote
should then be paired with the kit and the message will go
away. You can verify remote operation by navigating
through the menus.
Note
: If you are unsuccessful on the first attempt, power off the unit until you see the “Goodbye” message,
power it back on, and repeat the process.