Ninja NJ602CO Manual De Usuario

Locking 
Handle

 

* See “Speed Settings & Uses” chart. 

6  Press the power button ( ) or the 

selected button a second time to stop 
the attachment from turning or press a 
different button to change the speed.

7  If the ingredients stick to the side of 

the container, stop the appliance by 
pressing the power button ( ) and wait 
for the attachment to stop turning.  Then 
remove the lid by pressing the release 
button, lifting the handle up and pulling 
straight up.  (

Fig. 6)  Use a spatula to 

dislodge the pieces, replace the lid and 
continue processing.

8  To remove the container, press the power 

button ( ) to turn the appliance “Off”.  
Wait for the attachment to stop moving 
before removing.  (

Fig. 7) 

9  Depending on the consistency of the 

contents in the container, open the 
pouring spout cap and use the spout 
to empty liquid contents.  For thicker 
consistencies, or for removing dough 
from the bowl, remove the lid and 
attachment carefully (by its shaft), then 
empty contents from the container.

10  Unplug the appliance after use.

3  Place the color co-ordinated lid onto the 

corresponding container with the locking 
handle in the upright position and the 
pouring spout on the corner opposite the 
container’s handle. Align the arrows ( ) 
located on the lid and container’s handle.  
Ensure that the lid is completely seated 
and press the lid down into the container.  
Press the locking handle down so that 
the latches on the lid fit under the tabs 
on the container. (

Fig. 5)

NOTE: If you need to add additional 
ingredients while the appliance is 
processing, open the pouring spout cap 
and pour the ingredients in through the 
opening. 

4  Plug the power cord into the electrical 

outlet and press on the power button ( ).

 

NOTE: As a safety feature, the power 
button ( ) will flash and the motor will 
not work if the container and lid are 

installed correctly.  When the container 
and lid are installed properly, the power 
button ( ) will be solid, indicating that 
the appliance is ready for use.

5  Select the button that best suites your 

needs.

®

 

1  Holding the 6-Blade assembly by the 

shaft, place it onto the gear shaft inside 
the pitcher.  Ensure that the attachment 
fits around the gear shaft and that it is 
standing straight. 

2  Add the ingredients and secure the 

pitcher lid onto the pitcher.  (

Fig. 8)

3  Plug the power cord into the electrical 

outlet and press on the power button ( ).

 

NOTE: Please refer to “Speed Settings 
& Uses” chart for suggested uses and 
speeds.

1  Holding the whipping attachment by the 

shaft, place it onto the gear shaft inside 
the pitcher.  Ensure that the attachment 
fits around the gear shaft and that it is 
standing straight. 

2  Add the ingredients and secure the 

pitcher lid onto the pitcher.  (

Fig. 9)

3  Plug the power cord into the electrical 

outlet and press on the power button ( ).

 

NOTE: Please refer to “Speed Settings 
& Uses” chart for suggested uses and 
speeds.

  IMPORTANT: When using the whipping 

attachment for whipping egg whites, 
open the pouring spout cap after 30 
seconds to allow the egg mixture to 
aerate.

NOTE: The handle will remain locked in the 
upward position until the lid is completely 
seated on top of the container.