Netgear LG6100D Guía Del Usuario
Ethernet WAN Settings
106
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
home network (the LAN).
8. (Optional) Select the Use This Interface ID check box and specify the interface ID to be
used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the gateway generates one automatically from its MAC
address.
address.
9. Click Submit.
Ethernet WAN Security Settings
The Security Settings page lets you configure advanced settings for the Ethernet WAN port.
To specify security settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Security > Security Settings.
5. Specify the following settings:
Disable Port Scan and DoS Protection. DoS protection protects your LAN against
denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, Teardrop
Attack, UDP Flood, ARP Attack, Spoofing ICMP, Null Scan, and many others. This
feature should be disabled only in special circumstances.
Attack, UDP Flood, ARP Attack, Spoofing ICMP, Null Scan, and many others. This
feature should be disabled only in special circumstances.
Respond to Ping on Internet Port. If you want the gateway to respond to a ping
from the Internet, select this check box. Use this feature only as a diagnostic tool
because it allows your gateway to be discovered. Do not select this check box unless
you have a specific reason.
because it allows your gateway to be discovered. Do not select this check box unless
you have a specific reason.