Marantz AV Pre Tuner AV7005 Manual De Usuario
51
Basic version
Simple version
Information
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Advanced version
Front A/B connection
A second set of front speakers can be connected to the
UNBALANCED PRE OUT HL/HR terminals on the power amp.
In this case, perform the settings using the
SPKR A/B
button on
the remote control or main unit (vpage 26 “Set the front speakers
to be used”).
G
MM7055H
FL(A)
FL(B)
FR(B)
FR(A)
SW
For surround playback of a multichannel source, if you connect
the center speaker, surround speakers, surround back speakers
(or front wide speakers) and subwoofers, 7.1-channel playback is
available.
Front speakers can be used separately, depending on the
speaker’s specifications or playback source such as front speakers
(A) for multichannel playback and front speakers (B) for 2-channel
playback.
For speaker impedance and speaker cable connections, see power amp user guide.
2.1-channel connection
FL
FR
SW
BALANCED
UNBALANCED
G
MM7025H
n
For connecting four subwoofers
Four subwoofers can be connected to this unit.
The same signal is output from each subwoofer terminal.
The same signal is output from each subwoofer terminal.
Connect
Bi-Amp connection
A bi-amp connection is to connect separate amplifiers to the tweeter
terminals and woofer terminals of speakers compatible with the bi-amp
function. This prevents the back electromotive force (returned force without
output) of the woofer sent to the tweeter, which affects the sound quality of
the tweeter, and you can enjoy playback with higher-quality sound.
In this case, set “Set up “Amp Assign”” (vpage 52) to “SPKR-C”.
terminals and woofer terminals of speakers compatible with the bi-amp
function. This prevents the back electromotive force (returned force without
output) of the woofer sent to the tweeter, which affects the sound quality of
the tweeter, and you can enjoy playback with higher-quality sound.
In this case, set “Set up “Amp Assign”” (vpage 52) to “SPKR-C”.
FL
FR
w
q
w
q
(R)
(L)
G
MM7055H
When a Bi-Amp connection is used, the same signal is output from the
UNBALANCED and BALANCED PRE OUT FL/FR and SBL/SBR terminals.
For surround playback of a multichannel source, if you connect the center
speaker, surround speakers and subwoofers, 5.1-channel playback is
available.
UNBALANCED and BALANCED PRE OUT FL/FR and SBL/SBR terminals.
For surround playback of a multichannel source, if you connect the center
speaker, surround speakers and subwoofers, 5.1-channel playback is
available.
NOTE
• Use speakers compatible with bi-amp connections.
• When making bi-amp connections, be sure to remove the short-circuiting
• When making bi-amp connections, be sure to remove the short-circuiting
plate or wire between the speaker’s woofer and tweeter terminals.
1.AV7005U_ENG.indd 51
2010/08/23 18:32:56