Lorex SG21FD3044-161 Manual De Usuario
23
10 PAN/TILT
ZOOM
The DVR/MONITOR is equipped with a built-in Pan/Tilt Zoom feature, which is only available
when used in conjunction with a compatible Pan/Tilt Dome camera.
The Pan/Tilt Zoom feature supports “Pelco D” protocol.
To access and operate the PTZ feature, follow these instructions:
when used in conjunction with a compatible Pan/Tilt Dome camera.
The Pan/Tilt Zoom feature supports “Pelco D” protocol.
To access and operate the PTZ feature, follow these instructions:
1
Connect a compatible Pan/Tilt Zoom Dome camera to the CH 1 camera input.
2
Enter the Pan/Tilt Zoom mode by holding the PAN/TILT key on the
DVR/MONITOR, or press the Pan/Tilt button on the remote control
3
You will see a contracted screen with a blue border.
4
Use the Arrow keys to sideways, and
↵ Button to select whether to MOVE and
ZOOM the camera.
5
If you have selected MOVE, you can use all four arrow keys to Pan and Tilt in all
directions. If you selected ZOOM, use the arrow keys to Zoom IN / OUT.
6
Select and press
↵ on the EXIT option to escape Pan/Tilt mode.
NOTE:
The system automatically exits Pan/Tilt mode after 20 seconds of inactivity.
Refer to the diagram below for an illustration of Pan/Tilt Zoom mode.
[CH1 PAN/TILT MODE]
MOVE ZOOM FOCUS EXIT