GSI Outdoors PNEG-301 Manual De Usuario

PNEG-301 Two-Ring Door                                                                                                                                                           5

4. If some latch bars are loose or require excessive force to lock, loosen hex socket capscrews and 

adjust in or out until latch bars operate smoothly. Check that the panels are fully seated over all 
bearing pins.

5. Re-install outer cover. Adjust outer door hinges and latches as required.

6. Assemble door hold back as shown

. Open door cover until it approaches the bin wall. 

Hook retaining bracket over lower latch mount and position the door hold back against bin wall in 
a valley. Drill a 3/8" hole through the bin wall and bolt the door hold back to the bin.